This publication is not affiliated with The
Harley-Davidson Motor Company, Inc. or the Harley Owner's Group (HOG).
'ALL' trademarks are acknowledged to be the property of the Harley-Davidson Motor Co. and as such will not be used for any
commercial purposes by this site.
Disclaimer: this is NOT an official Harley-Davidson site and so, trade marks, names, part numbers, extracts of catalogues (etc) will
only be used for reference only.
Some technical procedures might also be explained but in NO way does it infer that these practices are condoned or advised by
the Harley-Davidson Motor Company.
IMPORTANT. This Site Has Absolutely NO Affiliation With The Harley-Davidson Motor Company..
40,000 Miles.....
Nt Trains Installer/Remover.....
Insert the expanding Collet through the Inner Bearing.....
The Tool assembled. Its similar to the one in the Factory Manual, but not quite the same...
Follow the FM concerning the use of the Tool and you can't go far wrong. Tis simple.
One thing though, the bearings make one almighty 'crack' on their way out, breakin the seal as such.....
Torrington vrs H-D....Guess which is which?
New Torrington B-148 mounted on the Installer Pilot...
